Toshiba Qosmio G20-102 User Manual page 129

Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
CPU
This function lets you set the CPU operating mode.
This option is only displayed on those models that use a Pentium-M
processor.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
Always High
Always Low
LAN
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
User's Manual
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation is
automatically switched when necessary
(Default).
CPU power consumption and clock speed
automatic switching function is disabled.
The CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
HW Setup
®
7-5