Inserting An Sd Card; Removing An Sd Card - Toshiba Qosmio G30 User Manual

Optional Devices
The TOSHIBA SD memory card format utility does not format the protected
area of the SD memory card. Should you need to format all areas of the
memory card, including the protected area, you will need to obtain an
appropriate application that applies the copy protection system.

Inserting an SD card

To insert an SD card, follow the steps below.
1. Insert an SD card in the Bridge media slot.
2. Press gently to ensure a firm connection.
■
Make sure the SD card is oriented properly before you insert it.
■
Do not turn the computer off or switch to Standby Mode or Hibernate
Mode while files are being copied - doing so may cause data to be lost.

Removing an SD card

To remove an SD card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
9-6
SD card
Figure 9-5 Inserting an SD card
SD card
Figure 9-6 Removing an SD card
Bridge media slot
Bridge media slot
User's Manual