Toshiba Qosmio G20-102 User Manual page 37

System automatic
Standby/Hibernation
Keypad overlay
Power on password
Instant security
Intelligent power
supply
Battery save mode
Panel power on/off
User's Manual
This feature automatically shuts down the system
into Standby Mode or Hibernation Mode when
there is no input or hardware access for a time
specified. You can specify the time and select
either System Standby or System Hibernation in
the System standby and System item of the Basic
Setup tab in TOSHIBA Power Saver
A ten-key pad is integrated into the keyboard.
Refer to the Keypad overlay
The Keyboard, for instructions on using the
keypad overlay.
Two levels of password security, supervisor and
user, are available to prevent unauthorized
access to your computer.
A hot key function blanks the screen and disables
the computer providing data security.
A microprocessor in the computer's intelligent
power supply detects the battery's charge and
calculates the remaining battery capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an AC
adaptor. You can monitor the remaining battery
capacity by using the Battery remaining item in
TOSHIBA Power Saver
This feature lets you save battery power. You can
specify the Power Save Mode in the Profile item
in TOSHIBA Power Saver.
This feature turns power to the computer off
when the display panel is closed and turns it back
on when the panel is opened. You can specify the
setting in the When I close the lid item of the
Setup Action tab in TOSHIBA Power Saver.
Introduction
section in Chapter 5,
1-11