Front Operation Panel
The configuration of the computer's front panel is controlled through the
following settings shown on the first page of the setup screen.
Front Operation Panel
This setting activates and deactivates the Front Operation Panel.
Front Operation
Panel
Front Operation
Panel
Beep Volume
With this setting, when the button is pushed, the beep volume changes.
Beep Volume
Beep Volume
Beep Volume
Beep Volume
LED Mode
With this setting, when the button is pushed, the indicator lighting method
will change.
LED Mode
LED Mode
User's Manual
Enabled.
Disabled (Default).
Off.
Low.
Medium (Default).
High.
Mode1
All Off Mode: Normally off, will light up at set
intervals when the button is pushed.
Mode2 (Default)
All lit Mode: Normally on, will go off at set
intervals when the button is pushed.
HW Setup
7-9