Advertisement
SECTIONS
Table of Contents
InSTaLLaTIon
Step 3 – Power ON your system
• Connect all peripherals and computers to the KM prior to powering
it up. Power on the KM by plugging it to the aC wall outlet. by
default, after product power-up, the active channel will be computer
#1, indicated by the applicable front panel push button LED lit.
Note: Power on self-test: as the product powers-up it performs a self-test
procedure. In case of self- test failure for any reason, including jammed buttons,
the product will be Inoperable. Self-test failure will be indicated by abnormal
LED behavior – for further information please refer to the KM setup guide.
HSL Secure KM Switches User Manual
1
2
3
5
Advertisement
