Christie DWU500S User Manual page 31

Menu item Description
Menu Location Sets up the on-screen display menu
location.
LAN (Standby) Enables or disables the LAN connection.
VGA Out Enables or disables the VGA Out
(Standby) connection.
Test Pattern Displays or hides the test pattern.
Signal Power On Once enabled, the system will
automatically turn the projector on when
a signal is detected.
Direct Power On Once enabled, the system will
automatically turn the projector on when
the electrical power is connected.
Security Protects your projector with a password.
Once enabled, you must enter the
password before you can project an
image.
Remote Sensor Selects the default location of the remote
sensor if more than 1 remote sensor.
Reset Restores all settings to their default
value.
DWU500S User Manual
020-001919-02 Rev. 1 (07-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Options
• Left Top
• Right Top
• Center
• Left Bottom
• Right Bottom
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• Security—Enables this function to prompt for a
password before using the projector.
• Security Timer—Sets the number of hours the
projector can be used.
• Change password—Sets or modifies the
password that is prompted when turning the
projector on.
• Front
• Top
• Yes
• No
Operation
31