Maintenance; Instructions Français - Omcan CE-CN-0006 Instruction Manual

Electric fryer
Hide thumbs Also See for CE-CN-0006:
Table of Contents

Advertisement

Available languages

Available languages

To ensure the fryer has a long life of use, you should clean the tank and heater at regular intervals, make
sure the heater and the oil are clean before the next use.
The heater bottom cover in the oil tank is to protect the heater from possible damage, it must cover the
heater when you are frying food.
PROBLEMS AND SOLUTION
Problems
No heat or the temperature is not
high enough.
Temperature is still high after
turning down the thermostat.
SÉCURITÉ ET GARANTIE
AVERTISSEMENT
1. Cet appareil de chauffage ne peut pas être relié à une prise électrique sans huile dans le réservoir.
Assurez-vous que l'huile est rempli entre le min et le niveau max avant de démarrer la machine.
2. Cette machine ne peut être utilisé avec de l'huile liquide, se il vous plaît jeter l'huile utilisée après
l'utilisation de la machine.
AVIS DE SÉCURITÉ
Les personnes qui utiliseront la machine doivent être soigneusement formés avant de l'utiliser.
Mettez la friteuse sur une surface ou un comptoir stable.
Ne retirez pas de la partie (s) jusqu'à ce que la machine a complètement refroidi, et est débranché.
La machine dispose d'un micro-interrupteur qui éteindra la friteuse lorsque la température atteint le
maximum.
La tension doit être la même que nécessaire.
UTILISATEURS RÉSIDENTIELS : Le fournisseur n'assume aucune responsabilité pour la couverture
des pièces ou de la main-d'œuvre en cas de défaillance des composants ou d'autres dommages
résultant de l'installation dans des applications non commerciales ou résidentielles. Le droit est
réservé de refuser l'expédition pour un usage résidentiel ; si cela se produit, vous en serez informé
Reason
No power.
Electrical components are broken.
Thermostat is set at low
temperature.
Temperature sensor is loose.
Thermostat is broken.
Instructions Français
7

Maintenance

Solution
Check power source.
Check and replace the broken
parts.
Check thermostat and adjust it to
the right temperature.
Release the oil and fix the sensor.
Replace the thermostat.

Advertisement

Table of Contents
loading

Table of Contents