Controls
and displays
D.ACCESS
After press ng, you can access a rado
station directly using the number buttons
(page 54),
8
Number buttons
Use the number buttons to dhectly select a
radio frequency (page 54) or the tracks on a
CD, DVD, etc.
9
CHANNEL+/-
Use to select channeEs when using a VCR,
DVR, etc, Also use to skip tracks backward or
forward on CDs, DVDs, etc.
10 INPUT SELECT
Use to select the input seulce.
11 LED
This Ightswhen
acommand
is sent from the
remote control.
12 SOURCE_
Press to turn on/off other components
connected
to the _eceiver.
13 DISC(ENTER)
The button's
use depends on the component
selected.
Ftcan be used to enter commands
for%/or
DTV, and can also be used to select
a disc in a multi-CD
player.
14 TV CONTROL buttons
These buttons a_ dedicated
to control the %/
assigned to the TV CONT button. Thus if you
only have one %/to hook up to this system
assign it to the TV CONT MULTI CONTROL
button.
If you have two %/s, assign the main
%/to the TV CONT button.
O
Use to turn on/off the power of the %/.
(TV CONTROL) INPUT SELECT
Use select the TVfunction.
CHANNEL +/-
Use to select channels,
VOLUME
+/-
Use to adjust the volume on your TV.
ER