Table of Contents
Advertisement
AXIS P5654-E Mk II PTZ Camera
Configure your device
Configure your device
Basic settings
Set the capture mode
1. Go to Video > Installation > Capture mode.
2. Click Change.
3. Select a capture mode and click Save and restart.
See also Capture modes on page 45.
Set the power line frequency
1. Go to Video > Installation > Power line frequency.
2. Click Change.
3. Select a power line frequency and click Save and restart.
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 45.
Adjust the focus faster with focus recall areas
To save the focus settings at a specific pan/tilt range, add a focus recall area. Each time the camera moves into that area it recalls the
previously saved focus. It's enough to cover half of the focus recall area in the live view.
We recommend the focus recall feature in the following scenarios:
•
When there is a lot of manual operation in live view, for example with a joystick.
•
Where PTZ preset positions with manual focus are not efficient, for example movements where the focus setting changes
continuously.
•
In low-light scenarios, where the autofocus is challenged by the lighting conditions.
Important
• The focus recall overrides the camera's autofocus at the specific pan/tilt range.
• A preset position overrides the focus setting saved in the focus recall area.
• The maximum number of focus recall areas is 20.
Create a focus recall area
1. Pan, tilt, and zoom into the area where you would like to have focus.
As long as the focus recall button shows a plus
2. Adjust the focus.
3. Click the focus recall button.
Delete a focus recall area
, you can add a focus recall area in that position.
6
Advertisement
Table of Contents
