AXIS P5654-E Mk II PTZ Camera
Specifications
Amber
Amber/Red
SD card slot
NO
NOTICE
NO
TICE
TICE
• Risk of damage to SD card. Don't use sharp tools, metal objects, or excessive force when inserting or removing the SD card.
Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the device's web interface before removing it.
Don't remove the SD card while the product is running.
This device supports SD/SDHC/SDXC cards.
For SD card recommendations, see axis.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 51.
•
Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.
Power button
•
Press and hold the power button to temporarily power the product when the dome cover is removed.
•
The power button is also used with the control button to reset the camera to factory default settings. See page 51.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
50