Table of Contents
Advertisement
AXIS P5654-E Mk II PTZ Camera
The web interface
Guard tours
Guard tour: Create a guard tour.
• Preset position: Select to create a guard tour with preset positions.
• Recorded: Select to create a recorded guard tour.
Preset position
A guard tour with preset positions continuously streams footage from a selection of preset positions in a random or fixed sequence.
You can choose how long the camera should stay at each preset position before moving on to the next. The guard tour will continue
to run in an endless loop until you stop it, even when there are no clients (web browsers) streaming the footage.
Settings
• General settings
-
-
-
• Step settings
-
-
Preset positions: To select multiple preset positions, press SHIFT while selecting the preset positions. Click
preset positions to the View order area.
View order: Displays the preset positions included in the guard tour.
• Import all preset positions: Add all preset positions in the order they were created, starting from the oldest one.
•
: Start the guard tour.
Limits
To narrow down the area under surveillance, you can limit the PTZ movements.
Save as Pan 0: Click to set the current position as zero-point for pan coordinates.
Set pan-tilt limits: Turn on to set pan-tilt limits for PTZ movements. The camera uses the coordinates of the center of the
image when you set pan-tilt limits.
•
Left pan limit: Click to limit the camera's pan movements to the left. Click again to remove the limit.
•
Right pan limit: Click to limit the camera's pan movements to the right. Click again to remove the limit.
•
Top tilt limit: Click to limit the camera's tilt movements to the top. Click again to remove the limit.
•
Bottom tilt limit: Click to limit the camera's tilt movements to the bottom. Click again to remove the limit.
• Auto-flip
• E-flip
Name: Enter a name for the guard tour.
Play guard tour in random order: Turn on to make the camera move unpredictably between the preset
positions during the guard tour.
Pause between runs: Enter your desired time interval between guard tours. You can enter any interval from
0 minutes to 2 hours and 45 minutes.
Duration: Choose how long you want the camera to stay at each preset position. The default value is 10
seconds, and the maximum allowed value is 60 minutes.
Move speed: Choose how quickly you want the camera to move to the next preset position. The default
value is 70, but you can select any value from 1–100.
: Enables the camera head to instantly reverse 360° and continue to pan beyond its mechanical limit.
: Automatically corrects the camera view by flipping the image 180° when the camera tilts beyond -90°.
24
and drag the
Advertisement
Table of Contents
