Changing Basic Settings - Siemens SX63EX12CN User Manual

Basic setting
Remote Start
Factory setting
Factory setting (may differ depending on device type)
1
15.2 Change basic settings
Tip:Connect your device to a mobile
terminal. You can make all settings
comfortably via the Home Connect
app.
Open the appliance door.
1.
Press.
2.
Approx. 3 seconds on
3.
to open the basic settings.
aThe display shows Hxx.
Display
Choice
text
rc1
rc0 - rc2
re
Start with
YES
To confirm
of
Busy-
Description
→ "Remote Start", page 41
activate or deactivate.
The following settings are
possible:
¡With the setting "rc0" the
function permanently
deactivated.
¡With the setting "rc1" you can
the function can be
selected via the key.
→ "Activate Remote
Start", page 41
¡With the setting "rc2" the
function permanently
activated.
This basic setting is only
available after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
page 40
Restore changed settings
to factory settings.
The settings for the first
start-up must be specified.
aThe display shows
to give.
Just as often
4.
until the display shows the desired
setting.
Just as often
5.
the display shows the desired
value.
You can change several settings.
To save the settings, press for
6.
approx. 3 seconds
Close the appliance door.
7.
Basic settingsNL
display
to press
press until
to press.
39