Setup And Connection; Scope Of Delivery; Setting Up And Connecting The Device; Drain Water Connection - Siemens SX63EX12CN User Manual

NLSet up and connect

4 Setup and connection

For correct use, connect the device to
electricity and water in a professional
manner. Observe the required criteria
and the installation instructions.

4.1 Scope of delivery

After unpacking, check all parts for
transport damage and the
completeness of the delivery.
If you have any complaints, please
contact the store where you purchased
the device or our customer service.
Remark:The device has been checked
at the factory for correct operation.
This may leave water stains on the
device. The water spots disappear
after the first washing cycle.
The delivery consists of:
¡Dishwasher
¡Instructions
¡Assembly instructions
¡Other documents containing information
tie
¡Mounting material
¡Steam protection plate ¡Salt
filling aid funnel
¡Connection cable
¡Quick guide
4.2 Setting up and connecting
the device
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently set up the device as
a free-standing device, you must
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under
12
a continuous worktop that is
permanently connected to the adjacent
cabinets.
Observe the safety instructions. →
1.
Page 4
Observe the instructions for the
2.
electrical connection.
Check the contents of the packaging
3.
and the condition of the device.
The required installation dimensions can be
4.
found in the installation manual.
Level the device using the
5.
adjustable feet.
Make sure you have a firm stand.
Install the drain water connection.
6.
→ Page 12
Install the drinking water
7.
connection. → Page 13
Connect the device to the
8.
power.

4.3 Drain water connection

Connect the appliance to a drain water
connection so that the contaminated
dishwashing water can be drained.
Install waste water connection
The required steps can be found in
1.
the supplied installation manual.
Connect the drain hose to the
2.
connection nipple of the siphon
using the supplied parts.
Make sure that the drain hose is not
3.
kinked, crushed or tangled.
Make sure that the flow of water is
4.
not prevented by a cap in the waste
water connection.