Kohler LOMBARDINI MARINE LMG 4000 Owner's Manual page 30

Table of Contents

Advertisement

CONTROLLI DA EFFETTUARE PRIMA DEL PRIMO AVVIAMENTO
• Verificare che il livello dell'olio motore raggiunga la tacca del massimo sull'astina;
• Verificare che le seguenti valvole di intercettazione siano aperte:
o acqua mare di raffreddamento;
o aspirazione combustibile;
o ritorno combustibile.
• Verificare che l'interruttore principale di bordo sia spento.
• Verificare che il commutatore GENERATORE / CORRENTE DI TERRA sia in
posizione GENERATORE.
CONTROLLI DA EFFETTUARE DOPO AVER AVVIATO IL GENERATORE
• Verificare che all'interno della capsula non vi siano gocciolamenti di acqua o
combustibile dalle connessioni delle tubazioni;
• Verificare che l'acqua di raffreddamento esca regolarmente dal tubo di scarico fuori
bordo;
Se tutto è a posto richiudere la capsula accertandosi di far combaciare bene le due metà ed il
Vs. gruppo LMG è pronto per fornire energia alla Vs. imbarcazione.
CHECK BEFORE FIRST STARTING
• Check that the lubricating oil level in the engine reaches the upper line on the deep stick;
• Check that the valves of the following feeding pipes are properly open:
o cooling sea water;
o fuel oil suction:
o fuel oil overflow return.
• Check that the main A.C. safety switch is SHUT-OFF.
• Check that the commutator GENERATOR / SHORE LINE is fitted in GENERATOR mode.
CHECK AFTER FIRST STARTING
• Check that inside the capsule there is no leakage from the connections of the several
pipes.
• Check that cooling water is flowing properly from the exhaust outlet, outboard.
When everything is in order, close carefully the capsule and your LMG is ready to supply
energy.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lombardini marine lmg 6000

Table of Contents