Table of Contents
Advertisement
This initial registration prepares the
Home Connect functions for use and is
activated the first time you use these
Home Connect functions. Please ensure
that the Home Connect functions can
be used only in conjunction with the
Home Connect App. Information on
data protection can be accessed in the
Home Connect app.
Remote start button }
When the dishwasher is connected to
t o n
R e m o t e s t a r t b u t
the home network, activate the
dishwasher remote control by pressing
the remote start button })".
If the dishwasher has still not logged
into Home Connect, access the Home
Connect settings by pressing the
remote start button })".
Observe the supplied Home Connect
documents.
Notes
When the login process is complete,
■
the remote start button })" goes
out
To activate the remote control, press
■
the remote start button })".
If the Home Connect Assistant was
■
aborted during start-up, press the
remote start button })" again.
If the connection to the router fails,
■
the WLAN X display flashes on
the display.
Wi-Fi without a connection to
the Home Connect server †
You can use the Home Connect app to
v e r
e H o m e C o n n e c t s e r
c o n n e c t i o n t o t h
W i - F i w i t h o u t a
disconnect from the Home Connect
server.
The appliance is then locally connected
to your mobile device without however
any connection to the Home Connect
server.
If you did not deactivate the
Note:
connection to the Home Connect
server, check your Internet connection.
Remote diagnostics ...
Customer Service can use Remote
s
R e m o t e d i a g n o s t i c
diagnostics ... to access your appliance
if you contact them.
Notes
You have to confirm Customer
■
Service access on your appliance.
You can switch off Remote
■
diagnostics ... using the on/off
switch ( or deactivate Customer
Service access in the Home Connect
app.
Setting up energy manager „
With the energy manager „ your
y m a n a g e r
S e t t i n g u p e n e r g
dishwasher is automatically started
during a time period you select with the
cheapest power supply offered at the
time by your alternative energy source
(e.g. photovoltaic system).
Should the energy manager „ be
unable to start the dishwasher remotely
(e.g. no power available), it will start the
dishwasher at the latest possible time
with a conventional power supply.
This is how to set up the energy
manager „:
Open the door.
1.
Switch on ON/OFF switch (.
2.
Press Info button {8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )R until the
4.
required setting is indicated on the
display window at the top @.
Home Connect en
17
Advertisement
Table of Contents
