Table of Contents
Advertisement
μ
hygienePlus
(HygienePlus) *
This function increases the
e n e P l u s )
h y g i e n e P l u s ( H y g i
temperatures and retains them for an
extra long time to obtain a defined
disinfection performance. Continuous
use of this function increases the
hygiene status. This additional option is
ideal for cleaning e.g. chopping boards
and baby bottles.
Ï
intensiveZone *
Perfect for a mixed load. You can wash
i n t e n s i v e Z o n e
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket
is intensified, the rinsing temperature
is increased slightly.
¿
extraDry *
An increased temperature during the
e x t r a D r y
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.
ï
Shine and Dry *
By increasing the amount of water
S h i n e a n d D r y
during the rinse cycle and extending the
drying phase, stains are prevented and
the drying result is improved. There is a
slight increase in the energy
consumption. Rinse aid is
recommended for the high gloss drying
function (even when using combination
detergents).
ß
Energy Save *
The "Energy Save" function can be
E n e r g y S a v e
used to reduce water and energy
consumption. The running time
is extended for optimum cleaning and
drying results.
Operating the appliance en
1
Operating the
appliance
Programme data
p l i a n c e
O p e r a t i n g t h e a p
The programme data (consumption
values) can be found in the summary
of instructions. They refer to normal
conditions and the water hardness set
value °E 16 - 20 medium. Different
influencing factors such as water
temperature or line pressure may result
in deviations.
Changing the settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory settings.
Change the setting as follows:
Open the door.
1.
Switch on ON/OFF switch (.
2.
Press Info button {8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button >)R until the
4.
required setting is indicated on the
display window at the top @.
Make the setting with setting buttons
5.
+ -`.
Press and hold the Info button {
6.
8 for 3 seconds.
The chosen setting has now been
stored.
If you change several settings, first
Tip:
make all changes in succession. Now
press the Info button { 8 for
3 seconds. This saves all set values in
the appliance.
33
Advertisement
Table of Contents
