Table of Contents
Advertisement
Installation -
Installation
5
Template Sheet
2
3
4
6
7
9
Disassemble the camera, See the section 'Installation -
1
Disassemble the camera' for details.
Using the template sheet, make the cabling hole on the
2
wall/ceiling.
Pull wires through and make all necessary connections
3
See the section 'Installation - Cabling' for details.
Fix the bottom case on the ceiling.
4
To achieve desired view direction and orientation, rotate
5
3-axis gimbal. To fix the setting, tighten the tilt stopper
screw.
Attach the dome cover to the bottom case.
6
Detach the protection film from the dome cover.
7
Advertisement
Table of Contents
