Table of Contents
Advertisement
Installation -
Cabling
1
2
+
-
+
-
DC12V
DI
3
4
7
5
+
-
COM OUT
DO
AUDIO
6
Network Connection
1
Connect the Straight through or crossover cable.
Benting the cable can cause water leakage.
Lan Cable thickness ø5.0 ~ ø8.0mm.
I/O Cable Connection
2
Power
3
Please check the correct rated power.
Rate Power
Consumption
DC 12V
Sensor/Alarm Input (DI)
4
Cable of the sensor/alarm input device should connect to +
and - of the Terminal Block.
Alarm Out / Relay Out (DO)
It connects to the alarm lights, siren or lamps and the
sensor types are normal open and normal close.
MIC
5
Built-in microphone.
Audio Out
6
Connect the 'Audio Out' port of the camera to the 'Line In'
port of the speaker.
If the speaker without the amplifier is connected to
Audio Out port, it doesn't work properly. Therefore, the
speaker with the amplifier or the separate amplifier is
needed.
Audio Out supports only RTSP Back channel function.
It plans to make it available on the web later.
SD Card Slot
7
14
Power
PoE
IEEE 802.3af class3
9W
Advertisement
Table of Contents
