Table of Contents
Advertisement
Installation -
Cabling
How to connect the Network Cable
Refer to the picture below and connect the network cable.
Installation Method 1
1
Without RJ45 Connector (Recommended)
a
b
Installation Method 2
2
With RJ45 Connector (Alternation)
b
a
1. Insert the RJ-45 cap Installer into the Lan cable.
2. Remove the Grommet blocking the bottom hole of the
camera.
3. Pass LAN cable with cap installer through the hole of
GROMMET from bottom to top.
4. Pay attention to the direction of the Grommet connection
when connecting cables.
5. Remove the RJ-45 cap Installer before connecting the
LAN cable to the camera.
6. Connect the LAN Cable to the camera.
7. After completing the cable installation, insert Grommet
into the bottom case.
Benting the cable can cause water leakage.
13
c
c
d
e
Advertisement
Table of Contents
