Table of Contents
Advertisement
Installation -
Installation Using Mount Plate
4
Template Sheet
Disassemble the camera. See the section 'Installation -
1
Disassemble the camera' for details.
2
Using the template sheet, make the cabling hole on the
2
wall/ceiling.
After passing the cables through the hole, fix the mount
3
plate on the template sheet.
Connect the network cable and power cable respectively.
4
See the section 'Installation - Cabling' for details.
3
Fix the bottom case on the mount plate. Press 3 bezels on
5
bottom case of camera till it sounds snap to lock the
camera to the mount plate.
5
To achieve desired view direction and orientation, rotate
6
3-axis gimbal. To fix the setting, tighten the tilt stopper
screw.
6
7
Attach the dome cover to the bottom case.
7
10
Insert the Lan cable into the rubber first as (a) below.
Put the Lan cable into (b), then (c) will be assembled to
(b) tightly. As a final step, (d) need to be assembled to (c)
without making any space.
a
c
b
d
Advertisement
Table of Contents
