Related Manuals for wavestore WV-10M2-27V13
Summary of Contents for wavestore WV-10M2-27V13
- Page 1 Wavestore Vision 10MP IR Dual Sensor IP Camera Installation Guide WV-10M2-27V13 Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
-
Page 2: Table Of Contents
Contents INTRODUCTION Important Safety Information Product & Accessories Part Name INSTALLATION Disassemble the Camera Installation Adjusting the camera angle Cabling Inserting / Removing an SD Memory Card SPECIFICATION Dimension... - Page 3 Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. If the product is not functioning properly or damaged, contact the service center or purchasing office. Warnings Cautions Serious injury or death may be caused Injury or equipment damage may be caused if any if any of these warnings are neglected.
- Page 4 Installation and Use Precautions The battery (battery pack or equipped battery) must not be exposed to excessive heat such as sunlight, fire, etc. Do not disassemble the camera at your discretion. If you forcefully install the product with excessive force, malfunction can damage the camera. Do not punch or shake the camera and be careful not to damage the camera with careless storage or malfunction.
- Page 5 Disposal of Old Appliances 1. The symbol marked in the product, will follow and covered by the Europe Directive 2002/95/EC. 2. All electornic disposal of waste is differenct by the government or locally, so so it need to check. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
-
Page 6: Introduction
Introduction - Product & Accessories Camera RJ-45 Cap Installer Grommet Quick Manual Torx Wrench Mount Screw - 2pcs Desi-Pack Test Monitor Cable (Moisture Absorber) -
Page 7: Part Name
Introduction - Part Name Dome Cover SD Card Slot Lan Port Video Change Button Reset Button Test Video Slot... -
Page 8: Installation
Installation - Disassemble the camera Before installing your camera, you have to read the following cautions. 1. You have to check whether the location can bear five times of the weight of your camera. 2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. -
Page 9: Installation
Installation - Installation Attach the Bottom case to selected Mount Bracket. Fix it with safety wire on the Bottom case and fasten it to fit the joint of Bracket and Bottom case well. Assemble the bottom case and bracket. Be sure to assemble the camera and bracket to match the case outline. -
Page 10: Adjusting The Camera Angle
Installation - Adjusting the camera angle Panning 170° Rotation 355° Tilting 70°... -
Page 11: Cabling
Installation - Cabling How to connect the Network Cable Refer to the picture below and connect the network cable. Installation Method 1 Installation Method 2 1. Insert the RJ-45 cap Installer into the Lan cable. 2. Remove the Grommet blocking the bottom hole of the camera. - Page 12 Installation - Cabling Network Connection Connect the Straight through or crossover cable. Benting the cable can cause water leakage. Lan Cable thickness ø5.0 ~ ø8.0mm. I/O Cable Connection Power Please check the correct rated power. Rate Power Consumption Power IEEE 802.3at class4 DC 12V DC 12V : 21.6W / PoE : 25.4W Sensor/Alarm Input (DI)
-
Page 13: Inserting / Removing An Sd Memory Card
Installation - Inserting/Removing the SD Memory Card The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Micro Recommended SD Card Specification (Not Included) - Type: Micro SD (SD/SDHC/SDXC) - Manufacturer: SanDisk, Samsung, Transcend, Micron... -
Page 14: Specification
Specifications - Dimension Unit : mm ø 210 105.3 50.7 16.6...