Denon UPO-250 Operating Instructions Manual page 12

— Ways to Use the Timer
SS
Example 1: Waking up to the music of a compact disc.
G3 - By - S
Press the tuner-preamplifier's ~-+ Press the CD player's
SYSTEM POWER button to OPEN/CLOSE bunon
switch on the power. tO Open the tray.
Press the tuner-preamplifier's
TIMER button.
Press the UP and DOWN buttons
of the tuner-preamplifier to display
"cb".
[es
Press the tuner-preamplifier's -> Press the cassette deck's
SYSTEM POWER button to OPEN/CLOSE button
switch on the power. to open the tray.
——$—$
Press the tuner-preamplitier's
TIMER button.
Press the UP snd DOWN buttons
of the tuner-preampiifier to display
"TAPE".
@ The tape will be played back in the direction indicated by the tape direction indicator in the tape deck on the side of the tape counter
display.
12
—~ Set the compact disc ~> Press the OPEN/CLOSE
in the trey. button again to close the tray.
rs
eee ee
>
OVE 0 Casey
— Load the cassette tape. —- Press the OPEN/CLOSE
button again to close the tray.
Example 3: Unattended recording of radio broadcests ("air checks")
— Load the cassette tape to -> Press the OPEN/CLOSE
which you will record. button again to close the tray.
~ FUNC -
Press the tuner-presmplilier's — Press the deck 2
SYSTEM POWER button to OPEN/CLOSE button
switch on the power. to open the tray.
Press the tuner-preamplifier's
TIMER button.
Press the UP and DOWN buttons
of the tuner-preamplifier to displey
AIR.CH.
4 | Follow steps 4 to 16 under "Setting the Timer" on Page 11.
e@ Timer recording starts in the direction indicated by the tape direction indicator of deck 2.
@ Check that the tape direction and REV MODE switch settings are as desired.
@ The section of leader tape at the beginning of the tape cannot be recorded. To avoid missing the beginning of the recording, set the
starting time to about 1 minute before the program is scheduled to start.
Checking the Timer Settings
To check the timer settings, switch on the power of the tuner-preamplifier, press the TIMER button, then press the ENTER/NEXT button.
The timer start mode, reception band, preset number, on time, and off time are displayed in order each time the ENTER/NEXT button is
pressed. One more press returns the display to the reception frequency.
When the on time and off time have not been set, 0000 fiashes and there is no transition to the next display.
Changing the Timer Settings
When the timer setting operation is repeated, the previous settings are deleted and the new settings are set.
Deleting the Timer Settings
The timer settings can be cleared by pressing the TIMER button and then while FUNC is being displayed, pressing the TIMER button
again or pressing the CLEAR button.
Note about the Set Timer
If the set time of the timer is reached while the power is on, the timer settings will take over and there will be a switch to the function that
has been set on the timer.
Cancelling the Tim
Press the TIMER STANDBY button and the ~ (Q~ mark will go off.
G)
m
2
m
wv
>
i
no
m
Q
=
Oo
z
L NS eR (_) ——(_] ee