Denon UPO-250 Operating Instructions Manual page 11

Eb
Setting the Timer
{Preset the MW, LW and FM stations in advance)
Example: Setting the timer to turn on at 12:35 and off at 12:56.
- B88 90 =r0x72
90.00 MHz FM is being received on preset number "1°.
87.50 MHz FM is set to preset number "3°.
Press the SYSTEM POWER button.
Press the TIMER button.
Press the UP and DOWN buttons
to display "TUNER®.
Press the ENTER/NEXT button.
Press the UP and OOWN buttons
to set the preset number.
Press the ENTER/NEXT button.
Use the UP and DOWN buttons to
set the hour at which the
timer is to switch on.
Press the ENTER/NEXT bution.
Use the UP and OOWN buttons to
set the minutes at which the
timer is to switch on.
Press the ENTER/NEXT button.
. Pa > Cs 5 ' o
re pace
Had
NOILOAS IWHYSNAD
ES OS Ca Pa |
Use the UP and DOWN buttons to
set the hour at which the
timer is to switch off.
Press the ENTEA/NEXT button.
Use the UP and DOWN buttons to
set the minutes at which
the timer is to switch off.
Press the ENTER/NEXT button.
Press the TIMER STANDBY button.
'The stumingnon goes oft
and the aurrent ame
Press the SYSTEM POWER button.
@ When the TIMER STANDBY button is pressed and the "(Q " mark is lit, the timer will function at the same times each day.
e To switch off the timer, press the TIMER STANDBY button and turn off the " (c) " mark.
NOTE:
The timer standby mark * (Q * will not light untess the current timer has been set. Should this be the case, set the current time, then
press the TIMER STANDBY button.
81.50 -%3 ~
11