Redx RX Series User Manual page 35

6. The installer must select the correct regional settings for the inverter. The installer will be able
to select the correct regional settings in the app during commissioning. Selecting the customer's
relevant Grid Operator will automatically allocate and lock the relevant Regional settings, the
settings will now be password protected. Alternatively the installer can login to
www.redxpower.com with their installer credentials. Then they must navigate to Devices page,
find their device by typing in the device serial number in the search field, then
click on the device serial number and select the correct region in the Deploy section. The
installer can also edit the Generation and Export Limit Control Settings and Power Quality
Response Mode settings on the Deploy page which are also password protected. The installer
can request the password from Redx.
Figure 6-1 - Export Soft and Hard Limit settings on Deploy page
Figure 6-2- Region selector in the Redx Power App
Rev 20230601 RX - 7000HY/5000HY Page 30 of 41