Wiring The Control (Ctrl) Cable To Headers - enphase IQ Combiner 5 Quick Install Manual

Section C - Wiring
Wiring the control (CTRL)
cable to headers
NOTE: Enphase has validated performance using the Enphase
Control Cable (SKU: CTRL-SC3-NA-01). Enphase cannot guarantee
performance when a third-party control cable is used.
Control cable components
1
C O M P O N E N T
Signal wires (blue, orange, black, red)
Drain cable
Termination resistor
Strip the cables for the connection
2
Enphase SKU for control cable: CTRL-SC3-NA-01
Drain wire
3" or to be trimmed till jacket, when not
connected to drain terminal
IQ Combiner 5/5C Quick Install Guide
P U R P O S E
Communication between the
Enphase components
For grounding the control cable shield
Terminate the daisy chain of the
control cable at the extreme ends
CTRL (L)
CTRL (H)
NA (to be trimmed)
CTRL (G)
0.3"
1 ½"
Screw terminal
for control cable
(torque 0.2 N m)
26