Table of Contents
Advertisement
Section A - Mounting the product
Step 3:
Removing the dead front
•
Unplug the Mobile Connect (for IQ Combiner 5C) and remove
the plastic dead front with the integrated Mobile Connect on
the dead front. It is not necessary to completely remove the
screws of the dead front.
•
Remove the filler plate on the dead front for each breaker
position to be used. To remove the filler plate, press the single
latch inward while gently pushing the filler plate out.
IQ Combiner 5/5C Quick Install Guide
1
Phillips screw #2
3
1
Risk of equipment damage. Always unplug the USB cable from
the IQ Gateway USB port prior to removing the dead front.
Risk of electric shock. To maintain the warranty, do not modify the
dead-front other than to remove or replace filler plates, as needed.
2
16
Advertisement
Table of Contents
