Erase All Settings, Software Reset - RADEMACHER RolloTron Basis 1100 Translation Of The Original Operating And Assembly Manual

i

16. Erase all settings, software reset

If necessary, you can erase all of your settings and
return the RolloTron Basic 1100 system to its original
factory settings.
74
1.
Remove the cover plate from the lower assembly
screws and setting buttons.
2.
+ + Simultaneously press and hold the
SO
WI
buttons for 4 seconds.
3.
The indicator light flashes rapidly.
4.
Release the buttons, subsequently all of the settings
will be deleted.
◆ End points
◆ Timer periods
5.
The indicator light will go off once the button is re-
leased.
EN