RADEMACHER RolloTron Basis 1100 Translation Of The Original Operating And Assembly Manual page 76

i
17. Removing the RolloTron Basic 1100 (e.g. in the event of a move)
8.
Remove the reel compartment cover.
9.
Check the position of the fastening hook.
10.
If necessary, move the fastening hook into an easily
accessible position.
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the
motor is running.
◆ Always remove the mains plug before touching the
reel compartment.
11.
Finally, remove the mains plug again from the socket.
12.
Release the belt from the fastening hook and pull it
out completely from the front of the RolloTron Basic
1100.
76
CAUTION!
EN