Table of Contents
Advertisement
Section 4 - Configuration
Enable DHCP
Select this option to enable the DHCP server.
Server:
Enter the following settings to configure your DHCP server:
DHCP IP
Specify the start and end IP addresses for the range of addresses to
Address Range:
be assigned by your router.
DHCP Lease Time:
Select the DHCP lease time from the drop down menu: 1 Hour, 2
Hours, 3 Hours, 1 Day, 2 Days, 3 Days, or 1 Week. The default is 1
Day.
Primary DNS
The Domain Name System (DNS) translates domain or website names
Server:
into Internet addresses or URLs. Enter the DNS server's IP address.
Secondary DNS
Enter the secondary DNS server's IP address.
Server:
Option60 Vendor
Enter Option 60 information here to be included in the DHCP request
ID:
communication.
DHCP Relay:
Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network, then enter the server IP
address.
Click Save when you are done.
LAN IPv6 Settings
IPv6 Global
Enter a valid IPv6 address with prefix length, for example,
Address:
2000:dc8:abcd:0015::0/64
Radvd
Enable or disable the Router Advertisement Daemon (RADVD) for
Enable:
advertising the essential network configuration for the local network
with other devices using IPv6 addressing scheme.
D-Link DSL-226 User Manual
Network - Advanced Settings
55
Hide quick links:
Advertisement
Table of Contents
