Table of Contents
Advertisement
Your new table saw has been designed to give you
many years of high quality performance. To insure
this goal, proper care and treatment is important.
Careful treatment begins with removing all pads from
the cartonand checking them against the list of loose
parts.The long box contains the rails. The large box
holdsall other parts, which are detailed in the Loose
Parts List.
•
Separate the saw and all parts from the packing
materials and check each against the packing list,
especially the small parts that can be hidden in the
packing material
Note: Do not discard the packing materials until you
have carefully inspected the saw, identified all
parts, and satisfactorily operated your new saw.
_IL WARNING:
Never use gasoline, naptha, or
other highlyvolatile solvents. Do not ever let
brake fluids, gasoline, petroleum-based
products,or penetrating oilscontact plasticparts.
Such chemicals can weaken or destroy plastic.
II Remove the wax paper covering on the table. Use
any ordinary household type grease and spot
remover. Immediately apply a coat of automotive
type paste wax to the table and table exensions.
,_
WARNING:
To prevent accidental startingthat
could cause possibleserious personal injury,
assemble all parts to your saw before connecting
it to power supply.Saw should never be
connected to power supplywhen you are
assembling parts, making adjustments, installing
or removingblades, or when not in use.
,_
WARNING:
If any parts are missing,do not
operate this tool untilthe missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
The following recommended accessoriesare currentlyavailable
•
Fence Guide System
•
Guide Master
•
Box Joint & Miter Guide
•
Universal Jig
•
Taper Jig
•
10 in. Sanding Disc
•
8 in. Sanding Disc
•
Elite Dado
•
ExcaliburDado
•
7 in. Adj. Dado 36 tip
•
7 in. Adj. Dado 24 tip
at Sears Retail Stores.
•
7 in. Stack Steel Dado
•
7 in. x 9/16 in. Stack Dado
•
7 in. MoldingHead Set
•
2 Bit MoldingHead Set
•
Saw Baskets
•
Jointer Clamps
•
Specialty Throat Plate
•
Miter Gage Hold Down Clamp
•
Align-A-RipXRC Rip Fence
•
Dust CollectionSystem
,_
WARNING: The use of attachments or accessories not listed might be hazardous.
9
[RAFTSMAN" TABLESAW315.228310
Hide quick links:
Advertisement
Table of Contents
