Table of Contents
Advertisement
BURNERS FEATURES
2
1
11
8
Gas operation: the gas coming from the supply line, passes through the valves group provided with filter and governor. This one
forces the pressure in the utilisation limits. The actuators move proportionally the air damper and the gas butterfly valve, in order to
achieve the optimisation of the gas flue values, as to get an efficient combustion.
The adjustable combustion head can improve the burner performance. The combustion head determines the energetic quality and the
geometry of the flame. Fuel and comburent are routed into separated ways as far as the zone of flame generation (combustion
chamber). The control panel, placed on the burner front side, shows each operating stage.
PART I: SPECIFICATIONS
3
4
5
7
8
10
Note: the figure is indicative only
1
Control panel with startup switch
2
Gas valve group
3
Electrical panel
6
4
Cover
5
Flange
6
Blast tube-Combustion head group
7
FGR inlet
8
Air pressure switch
9
Air intake
10 Actuator
11 Head adjusting ring nut
5
PART I: SPECIFICATIONS
Advertisement
Table of Contents
