6.
Secure the battery in the battery compartment so that it does not move around.
How you do this depends on the battery compartment configuration. If the battery
compartment includes a strap for holding the battery, see
Strap; if the battery compartment includes a hook-and-loop pad, see
Battery to the
Securing the Battery with a Strap
This type of battery compartment allows for certain accessories to be installed such as a
relay or internal solar regulator.
1.
If you have an internal solar regulator installed in the battery compartment, you
must remove its termination cover to fit the battery inside. Remove the two screws
(left and right) that fasten the termination cover to the solar regulator, and then set
the termination cover aside. (If you don't have an internal solar regulator, skip to
Step 2.)
Removing Termination Cover of Internal Solar Regulator
2.
The battery strap must already be threaded through the holes of the battery
compartment.
Pad.
FB2100 Flow Computer Quick Start Guide
Securing the Battery with a
D301787X012
November 2023
Securing the
29