Husqvarna PP492HF Workshop Manual page 30

7 7
9
10
12
30 30
SERVICE AND MAINTENANCE SERVICE AND MAINTENANCE
11
9. Feed Shaft
Replace all the o-rings on the feed
shaft�
Assemble the Track Feed Slip
Clutch (p� 115)
10. Feed Motor
Replace the o-rings and seals on
the feed motors�
Remove Feed Motors (p� 101)
11. Electrics
Replace all the seals for the saw
head electronics, don't miss the
blue silicon seals�
Assemble Feed Motors (p� 120)
Cable
Replace the pins, connectors
and ground frame in the haring
connector to the saw head
Dismantling the Saw Head
Electronics (p� 99) and
Assemble the Saw Head
Electronics (p� 121)