Remove Feed Motors - Husqvarna PP492HF Workshop Manual

1
3
5
7
9
REPAIR INSTRUCTIONS
2
4
6
8

Remove Feed Motors

First see: Dismantling the Saw
Head Electronics (p. 99)
1� Remove the four screws holding
the bracket�
2� Thread the cables out and lift the
feed motor cover off�
3� Remove the four screws on the
feed motor�
4� Lift the feed motor away�
5� Remove the four screws on the
feed motor�
6� Lift the feed motor away�
7� Make sure to remove the shrink
tubing and wire seal to be used on
the new feed motor�
8� When assembling the electric
motor use special tool: 505 53
86-01�
9� Center the electric motor with
special tool: 505 53 86-01 and
tighten all 4 screws�
Reverse steps for reassembly�
10.3
1 0 1