Reassemble The Feed Motor Gearbox - Husqvarna PP492HF Workshop Manual

10.3
1
2
4
6
8
1 0 4
REPAIR INSTRUCTIONS
3
5
7
9
Reassemble the Feed Motor
Gearbox
First see: Remove Feed Motor
Gearbox (p. 102)
1� Replace the radial bearing and
assembling the worm screw to the
planatary gearbox �
2� Replace and grease the o-ring�
3� Lubricate the worm screw and
reinsert the gearbox�
4� Fasten the gearbox with the four
screws�
5� Lubricate and insert a new needle
bearing to the worm screw�
6� Lubricate and replace the o-ring�
7� Place the washers and bearings on
the bottom of the gearbox�
8� Lubricate and replace the o-ring
on the lid�
9� Reinsert the lid at the bottom and
fasten it with the 4 screws�