TechniSat DIGITRADIO 380 CD IR Manual page 68

> Change the value with the  or  buttons and then press OK.
This preset can be retrieved at any time in My EQ.
17.2 Audio stream quality
The quality of the audio stream may be adapted to the Internet speed. The higher
the quality, the higher the data transfer rate.
> Press the MENU button and then select [System settings] > [Audio stream
quality].
> Select a quality level and press the OK button to save.
17.3 Internet settings
> Press the MENU button and then select [System settings] > [Internet
settings].
In this menu you will find some settings and information about Internet connection.
> Select [Network wizard] to establish a WiFi connection.
The network wizard shows you all the WiFi stations within range. Use the
/ and OK buttons to select the WiFi network you recognise and enter the
password using the displayed keyboard. Then select
OK button. If the password entered is correct, a connection to the network is
now established. The signal bars
whether a connection exists.
To cancel the input, select
mistake, you can delete the last letter you entered by pressing
17.3.1 WPS connection
> Select [WPS] if your router has the WPS function. This establishes a direct
connection to the router without having to enter the - WiFi password.
Whether the WiFi network has the WPS function is indicated by the [WPS]
text in front of the network name.
The WPS function can also be activated directly via the menu item [PBC
WLAN establishment].
How you activate WPS on your router can be taken from its instruction
manual.
> Start WPS on your router by pressing the relevant button.
> On the DIGITRADIO 380 CD IR, select [Press WPS Button]. Take note of the
instructions on the display.
> If your router only supports the WPS PIN, select [PIN] on the DIGITRADIO
380 CD IR and take note of the PIN shown on the display. You then need to
enter the PIN in the router.
68
in the status bar of the display indicate
and press the OK button. If you make a
and press the
.