TechniSat DIGITRADIO 380 CD IR Manual page 66

Alternatively:
> Press the SLEEP button (18) on the remote control repeatedly.
A moon symbol appears in the status bar of the display with the time still
available until the DIGITRADIO 380 CD IR switches to standby.
16.2 Alarm
> Press the MENU button and then select [Main Menu > Alarm].
Alternatively:
> Press the Alarm button (17) to jump straight to alarm configuration.
16.2.1 Setting the alarm time
The alarm function cannot be operated until the correct time has been set.
Depending on the configuration, this either happens automatically or will need
to be set manually. The time can either be updated manually, via DAB/FM or
via the Internet. For more information on this, see Section 17.4.
> Select an alarm time memory Alarm 1 or Alarm 2 using the  or  buttons
and confirm with OK.
> Then go through all the points one after the other. Confirm each entry with
the OK button.
Repeating
> You can choose between Daily (every day of the week), Once, Weekdays
(Mon - Fri) and Weekends (Sat and Sun). Press the OK button to apply the
setting.
Time
> Here you can enter the alarm time and date (if required).
Using the / buttons, first select the hours and press the OK button to
save. Then enter the minutes. Accept this too by pressing the OK button.
If Repeat > [Once] has been selected, you must also enter the date as well
as the time.
Mode
> You then enter the source. The available options are Buzzer, Internet Radio,
DAB+, FM, CD and USB. Press the OK button to accept the setting.
Station
> If you have selected Internet Radio, DAB or FM, you can then enter whether
or not you want to be woken up by the last station listened to or by one
from your Favourites list.
66