TechniSat DIGITRADIO 380 CD IR Manual page 62

13.2 Pairing
> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
If you activate Bluetooth on your music player, please consult the
corresponding instruction manual for the device which you wish to pair with
the DIGITRADIO 380 CD IR.
Please note that only 1 device can be connected to the DIGITRADIO 380 CD
IR at any one time.
Ensure that you do not exceed the maximum Bluetooth range of 10 metres
to guarantee excellent playback quality.
> Select the list of Bluetooth devices found on your music player.
> In the list, search for the item DIGITRADIO 380 CD IR and select it. If the
selection requires a PIN, enter "0000" (4 x zero).
> If pairing is successful, the [BT] symbol in the DIGITRADIO display stops
flashing.
13.3 Playing music
> Select a music track on your music player and play it.
> The sound is now played via the DIGITRADIO 380 CD IR.
You can use the Play buttons on the DIGITRADIO remote control to control
the playback on your music player (only with compatible devices).
Play/Pause.
Next track.
Press 2x for previous track, press 1x to play the track from the beginning:
Stop playback.
Ensure that the volume on your music player is not set too low.
62