TechniSat DIGITRADIO 380 CD IR Manual page 54

> Press the BACK button to move back a step.
Closing the menu: Press the BACK or MENU button several times or wait for
approx. 15 seconds.
7.1 Selecting the source
> Press the MODE button as often as required until the desired source is shown
on the display.
Alternatively:
> Press the MENU key.
> Use the  or  buttons to select the entry [main menu] and confirm your
selection with OK.
> Use the  or  buttons to select the desired source and confirm your
selection with OK.
8 Internet Radio and Podcasts
The DIGITRADIO 380 CD IR is equipped with an Internet radio receiver.
In order to receive Internet radio stations/broadcasts/podcasts you need a WiFi
router with Internet access.
> Press the MODE button repeatedly until [Internet Radio] or [Podcast]
appears on the display.
Alternatively:
> Press the MENU button and then select [Main menu > Internet radio] or
[Podcasts].
If you are starting Internet radio for the first time without having configured a
WiFi connection, the search wizard appears showing you all the WiFi stations
within range. Use the /, VOL+/- (/) and OK buttons to select the WiFi
network you recognise and enter the password using the displayed keyboard.
Then select
correct, a connection to the network is now established. The signal bars
in the status bar of the display indicate whether a connection exists.
To cancel the input, select
mistake, you can delete the last letter you entered by pressing
54
and press the OK button. If the password entered is
and press the OK button. If you make a
.