Table of Contents
Advertisement
AXIS Q6315-LE PTZ Camera
Additional settings
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Settings > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
4. Use the Tone mapping slider to adjust the amount of WDR.
5. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize license plates, you can use the pixel
counter.
ABC 123
Image with WDR.
9
Advertisement
Table of Contents
