Axis 01924-003 User Manual page 17

AXIS Q6315-LE PTZ Camera
Additional settings
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
Turn on shock detection:
1. Go to Settings > System > Detectors.
2. Turn on shock detection, and set a value for the shock sensitivity.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Device status, select Shock detected.
4. Click + to add a second condition.
5. In the list of conditions, under Scheduled and recurring, select Scheduled event.
6. In the list of schedules, select After hours .
7. In the list of actions, under Recordings, select Record video while the rule is active.
8. Select a Camera.
9. Set the prebuffer time to 5 seconds.
10. Set the postbuffer time to 60 seconds.
11. Select where to save the recordings.
12. Click Save.
17