Canon EOS REBEL T6 W Instruction Manual page 92

Responding to Error Messages
21: No address assigned by DHCP server
What to check on the camera
On the camera, IP address is set to [Auto setting]. Is this the

correct setting?
If no DHCP server is used, configure settings after setting the IP

address to [Manual setting] on the camera (p.108).
What to check on the DHCP server
Is the power of the DHCP server on?

Turn on the DHCP server.

Are there enough addresses for assignment by the DHCP

server?
Increase the number of addresses assigned by the DHCP server.

Remove devices assigned addresses by the DHCP server from

the network to reduce the number of addresses in use.
Is the DHCP server working correctly?

Check the DHCP server settings to make sure it is working

correctly as a DHCP server.
If applicable, ask your network administrator to ensure the DHCP

server is available.
92