Connecting Via Wps (Pin Mode) - Canon EOS REBEL T6 W Instruction Manual

Connecting via WPS (PIN Mode)

This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding

area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.

Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [q].
2
Select [q] (Connect to smartphone)

and press <0>.

The camera's <k> lamp will blink.
Select [Select a network].
3
Select [Select a network] and press

<0>.
Select [OK] and press <0> to go to

the next screen.
45