Connecting to a Detected Network Manually
Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access points nearby.
Selecting the Access Point
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
Select [m].
2
Select [m] (Upload to Web service)
and press <0>.
Select a Web service.
3
Select a Web service to connect to,
then press <0>.
The contents and ordering of the list
of items displayed will vary depending
on settings.
The Web service to connect to can be
changed when reconnecting (p.80).
The camera's <k> lamp will blink.
Depending on the selected Web
service, the [Send to] screen is
displayed. Select a destination (p.75).
71