Canon EOS REBEL T6 W Instruction Manual page 50

Connecting to a Detected Network Manually
Entering the Access Point Encryption Key
Enter the encryption key (password) specified for the access point.

For details on the specified encryption key, refer to the access
point's instruction manual.
The screens displayed in steps 5 to 7 below vary depending on the

authentication and encryption specified for the access point.
Go to page 51 when the [IP address set.] screen is displayed

instead of the screens for steps 5 to 7.
50
Select a key index.
5
The [Key index] screen is displayed

only if WEP encryption is used by the
access point.
Select the key index number

specified for the access point, then
press <0>.
Select [OK] and press <0> to go to

the next screen.
Select the format and the number
6
of characters used for the key.
Select the format and the number of

characters used for the key, then
press <0>.
Select [OK] and press <0> to go to

the next screen.
Enter the encryption key.
7
Enter the encryption key using the

virtual keyboard (p.12), then press
the <M> button.

The IP address setting screen is
displayed.
For subsequent operations, see page

51.