Canon EOS REBEL T6 W Instruction Manual page 22

Connecting Automatically with the NFC Function
The device name set
on Camera Connect
The settings for connecting to a smartphone are now complete.
You can check or change the device name on the setting screen of Camera
Connect.
22
Connect to the camera.
3
When a connection is established,

the screen on the left will appear on
the camera's LCD monitor. When
connecting to the same smartphone,
this screen will not appear again.
To specify viewable images, press the

<B> button. See step 5 on page
58 to set them.

The camera's <k> lamp will light up
in green.
Select [OK] and press <0>.


After a message is displayed, the
camera's LCD monitor will turn off.
 The main window of Camera Connect
will be displayed on the smartphone.
Operate the camera using
4
Camera Connect.
Perform further operations using

Camera Connect. See page 28.