Canon EOS REBEL T6 W Instruction Manual page 52

Connecting to a Smartphone
Operation on the Camera-2
The device name set
on Camera Connect
The MAC address of the camera can also be checked on the [General

sett.] screen (p.88).
You can check or change the device name on the setting screen of

Camera Connect.
While connected, the camera's auto power off does not function.

52
Select the camera to connect to
3
on the smartphone.
Select and touch the camera to

connect to from [Cameras] on
Camera Connect.
If multiple cameras are displayed,

identify the camera to connect to by
its MAC address displayed on the
camera's LCD monitor.
Connect to the camera.
4
When a connection is established,

the screen on the left will appear on
the camera's LCD monitor.
To specify viewable images, press the

<B> button. See step 5 on page
58 to set them.
Press the <Z> key to select [OK],

then press <0>.

The camera's <k> lamp will light up
in green.

After a message is displayed, the
camera's LCD monitor will turn off.

The main window of Camera Connect
will be displayed on the smartphone.