Canon EOS REBEL T6 W Instruction Manual page 55

Terminating the Connection
To terminate the connection, perform either of the following operations.
While connected, a picture cannot be taken even if the camera's shutter

button is pressed.
In remote shooting, the AF speed may become slower.

Depending on the connection status, image display or shutter release

may be delayed.
Even if movies are displayed in the list, they cannot be saved to a

smartphone.
If you send RAW images to a smartphone, the high ISO speed noise

reduction effect of saved images on the smartphone may become
smaller. Therefore, if you shoot RAW images, setting the image-
recording quality to 1+73 is recommended.
The connection will also be terminated if you turn the Mode Dial or open

the card slot/battery compartment cover.
If you send RAW images to a smartphone, they will be resized to b and

saved.
While connected, the camera's auto power off does not function.

While connected, disabling the smartphone's power saving function is

recommended.
The camera's <k> lamp will blink rapidly when images stored in the

camera are being saved to a smartphone.
Operating the Camera Using a Smartphone
On the smartphone's Camera
Connect screen, tap [t].
Set the camera's power to
<2>.
55