Canon EOS REBEL T6 W Instruction Manual page 14

Basic Operation and Settings
For further connection settings, see the pages that correspond to the

device to be connected and connection method.
When using the NFC function, see page 16.

[Wi-Fi/NFC]
Set to [Enable] to enable the selection of [Wi-Fi function] under the

[53] tab.
When the use of electronic devices and wireless devices is

prohibited, such as on board airplanes or in hospitals, set it to
[Disable].
When it is set to [Enable], you cannot use the camera by connecting

it to Connect Station, a computer, printer, GPS receiver, TV set, or
other device with a cable (p.15).
Using the Camera While Wireless Functions Are Active
When you want to prioritize the wireless connection, do not operate the
power switch, Mode Dial, card slot/battery compartment cover, or other
parts. Otherwise, the wireless connection may be terminated.
14
Select the Wi-Fi function to
4
connect to.
Press the <Y> <Z> keys to select

an item.

When the connection settings are not
registered, the setting screen is
displayed.

When the connection settings are
already registered, the reconnection
screen is displayed.