Mitsubishi Heavy Industries FDUA160AVSAVH Service Manual page 127

Weekly timer
You can set four on timer and off timer operations for each day of the week.
Advice
· The Clock setting must be made when the weekly timer is used.
· The weekly timer can be set from the main R/C only.
1
Tap the Menu button on the TOP screen and select
Enter the administrator password if the administrator password input screen is displayed.
■There are cases that the Input password screen is displayed by the Permission/Prohibition setting.
Weekly timer
Select the item.
Weekdays Sat, Sun
All days Each day
2
1
Back
3 4
Weekly timer
1
Mon Tue Wed Thu Fri Sat Sun
2
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
All Disable Back
Select the day of the week.
3
1
2
Useful functions
2
W e h t n e h c s e r n e o t e s c e l t t e h e s
① Weekdays : Monday - Friday
② Sat. Sun : Saturday, Sunday
③ All days : Monday - Sunday
④ Each day : Moves to the day of the week setting screen.
3
When a desired day of the week ① is tapped on the display, contents of current setting for the day are displayed.
4
For the holiday setting, tap the block ② under the day to switch between " " (the holiday setting) and "(Blank)" (reset).
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
■To enable the timer on the day set as holiday, it is necessary to reset the holiday setting.
When tapping ③ All Disable button, the timer does not operate on all days of the week.
When the timer is used, be sure not to set "All Disable".
5
c S e r n e o t c e h k c o c t n n e s t f o u c
setting is displayed.
When the contents are changed or
new setting is added, select a ①
setting line No. and tap the ②
Change button.
■The ③ Zone button is displayed when
performing zone settings. Tapping the ③
Zone button will display the set zone
states.
3
⇒
Weekly timer .
i t t g n a r g n , e e s c e l a t d y a o t f e h e w k e
(☞5 )
(☞3 )
e r r t n
1
2
4 5
126
- -
'21 • PAC-SM-398
o t e b s . t e
6
e D l i a t e s i t t g n
setting contents is displayed.
① Tap the State button to switch
between "State Enable" and
"State Disable".
3
② Tap the Type button to switch
between the "OFF timer" and the
"ON timer".
③ Select a desired time (at 5-min
intervals) with the
▲
④ In case of "ON timer" when the
Next button is tapped,
operating conditions at the start
of operation can be set.
⑤ The Zones button is displayed
when performing zone settings.
Tapping the Zones button will
display the set zone states.
(☞1 2 )
(☞5 )
c s e r n e r o f h t t e m i r e
▼
buttons.
(☞7 )